This is the third of three posts on the natural countertop that I am installing in my townhome. See the photos below for the sink install. I cut out a sink hole using a hole saw for the corners and my Festool circular saw. Measure twice, cut once! The sink fits...
This is the second post on the countertop that I’m creating for my townhome. See the photos below for its progress. Gaps and cracks were filled with an epoxy resin. I used some masking tape to contain the resin. After the resin hardened I used a orbital sander...
As you may recall I harvested logs that I turned into planking that was used for the floors in my townhouse. In addition, I had a large Tamarack log that was flat sawn into 2 1/4 inch slabs. I intended to use this wood for a kitchen countertop. See the photos below...
